Easy as 1-2-3: InnoMax Modular Design makes Portable Waterbed  setups and moves easy

Constructed of three simple components;

1 – the Top Comfort Layer Panels: consisting of an Anatomically Zoned insulation layer below fashionably quilted zip on Top Cover available with a variety of support options,

2 – the Fluid Suspension Support Core: consisting of water filled Cylinder Tubes, and

3 – the Base Container: consisting of innovative Sling Rail foam bolsters covered within a vinyl safety liner which sits inside the mattress bottom & side enclosure.

Customizable Firmness: allows individual adjustability levels for each side of the bed 

•           Customizable Firmness: The individual cylinder tubes allow users to customize the feel of the bed by adjusting the water fill levels which can create different firmness levels for each side of the mattress if so desired. The number of tubes used for standard bed sizes is; 5 for Twin, 8 for Queen and 10 for King.

•           You may optionally fill waterbed tubes in a bathtub or sink. This is another advantage of the Portable Waterbed tube system, as the individual tubes are designed to be portable and filled in a convenient or remote location.

•           Portability: The tubes are light, making it easy to carry them to and from the nearest bathroom or kitchen for filling or installing.

Faucet Adapters: may optionally be used with a standard garden hose to fill and drain your Portable Waterbed

• Faucet Adapters: You can use a standard garden hose with a waterbed fill and drain kit, which includes adapters to connect the hose to most kitchen or bathroom faucets.

• Add Conditioner: Remember to add the required Waterbed Conditioner tablet or solution to the water in each tube during the filling process to keep the water fresh and prevent algae growth.

• Burp the Air: After filling, slowly lay the cylinder down flat and remove the cap/plug briefly to allow excess air out before sealing it tightly.

InnoMax Portable Waterbed Options: offer a variety of tailoring from hi- and lo-profile enclosures, to reduced wave or waveless tubes as well as a temperature controlled option 

In addition to a variety of Mattress construction options from lo- to hi-profile enclosures, some offering reversible inserts, Portable Waterbed tube cylinders offer two performance options. From the original water filled chambers designated as reduced wave, Tube Cylinders have evolved to include a waveless option which provides additional wave dampening performance.

In Closing

InnoMax Portable Waterbeds come standard with sufficient foam insulation to be comfortable without the use of a heater. However if you really want to have one, please use only Waterbed Heaters specifically designed and certified compliant with Underwriters Laboratories UL1445 Standard for use with modular tube waterbeds like InnoMax Softside Waterbed heaters. For your reference InnoMax Portable Waterbeds have been specifically designed to facilitate optionally installing the insulation pad below the heater(s) with tubes on top (refer Setup Instructions link above) to provide a temperature controlled sleep environment…but that’s another Waterbedtime Story.

Contributing author for this edition has been Irvin Saathoff who has been working with InnoMax in various capacities over the past half century. Check back in on the next episode of Waterbedtime Story when we share yet another perspective. In the meantime please feel free to connect with InnoMax Corporation anytime at Sleep@InnoMax.com.